PART |
Description |
Maker |
5962-0420501HYC 5962-0420501HPA 5962-0420501HXA 59 |
0.5 Amp Output Current IGBT Gate Drive Optocoupler 0.5安培输出电流IGBT栅极驱动光电耦合 5962-0420501HYC · 0.5 Amp Output Current IGBT Gate Drive Optocoupler 5962-0420501HPA · 0.5 Amp Output Current IGBT Gate Drive Optocoupler 5962-0420501HXA · 0.5 Amp Output Current IGBT Gate Drive Optocoupler 5962-0420501HYA · 0.5 Amp Output Current IGBT Gate Drive Optocoupler 5962-0420501HPC · 0.5 Amp Output Current IGBT Gate Drive Optocoupler HCPL-5150-200 · 0.5 Amp Output Current IGBT Gate Drive Optocoupler HCPL-5150-300 · 0.5 Amp Output Current IGBT Gate Drive Optocoupler HCPL-5151-200 · 0.5 Amp Output Current IGBT Gate Drive Optocoupler HCPL-5150-100 · 0.5 Amp Output Current IGBT Gate Drive Optocoupler HCPL-5151-100 · 0.5 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent(Hewlett-Packard) Agilent (Hewlett-Packard)
|
HCPL-3120 |
2.0 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard) Agilent(Hewlett-Packard)
|
HCNW3120 HCPL3120 |
2.0 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent(Hewlett-Packard)
|
ACNW3190 ACNW3190-000E ACNW3190-300E ACNW3190-500E |
5.0 Amp High Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED AVAGO TECHNOLOGIES LIMI...
|
ACPL-P340-560E ACPL-W340-560E ACPL-P340-060E ACPL- |
1.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage in Stretched SO6
|
AVAGO TECHNOLOGIES LIMITED AVAGO TECHNOLOGIES LIMI...
|
ACPL-K342-060E ACPL-K342-000E ACPL-K342-560E ACPL- |
2.5 Amp Output Current IGBT Gate Drive Optocoupler with Active Miller Clamp, Rail-to-Rail Output Voltage and UVLO in Stretched SO8
|
AVAGO TECHNOLOGIES LIMI... AVAGO TECHNOLOGIES LIMITED
|
ACPL-W314-500E |
ACPL-P314 and ACPL-W314 0.6 Amp Output Current IGBT Gate Driver Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
ACPL-331J-500E |
1.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO, Fault Status Feedback and Active Miller Clamping
|
AVAGO TECHNOLOGIES LIMITED
|
FGB20N6S2D FGH20N6S2D FGB20N6S2DT FGP20N6S2D |
600V, SMPS II Series N-Channel IGBT with Anti-Parallel Stealth Diode Switch Mode Power Supply; Output Power:300W; No. of Outputs:1; Output 1 VDC :5VDC; Output Current 1:60A; Power Supply Mounting:Chassis; Output Current:60A; Output Power Max:300W; Output Voltage:5VDC; Series:JWS RoHS Compliant: Yes 600V, SMPS II Series N-Channel IGBT with Anti-Parallel StealthTM Diode 600V/ SMPS II Series N-Channel IGBT with Anti-Parallel StealthTM Diode 600V, SMPS II Series N-Channel IGBT with Stealth Diode, TO-263/D2PAK Package 600V, SMPS II Series N-Channel IGBT with Anti-Parallel Stealth TM Diode
|
Fairchild Semiconductor Corporation FAIRCHILD[Fairchild Semiconductor]
|
SKIIP03NAC066V1 |
Large Current 300mA CMOS LDO Regulators; Output voltage (V): 2.8; Output current (mA): 300; Supply voltage (V): 2.5 to 5.5; I/O voltage difference (mV): 60; Ripple rejection (dB): 60; Circuit current (µA): 65; Package: HVSOF6 3-phase bridge rectifier 3-phase bridge inverter
|
Semikron International
|
MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ... The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ... The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ... The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc. MICROCHIP[Microchip Technology]
|
HCPL-3160 |
2.0 Amp IGBT Gate Drive Optocoupler with Integrated Over-current Protection and Fault Feedback
|
Agilent (Hewlett-Packard) HP[Agilent(Hewlett-Packard)]
|